You’re Ready
for Easy Level 2 Charging
Based upon your home setup, the NeoCharge Smart Splitter can help get you easy EV charging while saving thousands by avoiding expensive electrical upgrades.
Buy nowHere’s what you need:
The NEMA 6-50 outlet is commonly found in garages and is used for high power appliances such as water heaters, saunas, welding equipment, EV chargers, etc.
An extension cord can be used to when the charger's plug is not within reach of the outlet.
Setup Notes:
The NEMA 6-50 outlet sometimes used by EV chargers, so in some rare cases the charger may plug in without needing an adapter to 14-50R.Get Started with your Smart Splitter Pro Bundle
Get Started with your Smart Splitter Pro Bundle
UL Certified
5-7x Faster Charging
Auto Switching
Avoid Expensive Panel Upgrades
Install Yourself in Minutes
80%
Avoid a Panel Upgrade
$2000
Average Savings
5-7x
Faster Charging with Level 2
FAQs
How does the Smart Splitter work?
The Smart Splitter works by intelligently sharing a single 240V outlet between an appliance and an EV charger or between two EV chargers. It uses power-sensing technology to automatically switch power between both outlets, ensuring safe and efficient operation.
For appliance and EV charger setups, the splitter prioritizes the appliance and resumes charging the EV when the appliance is not in use.
For two EVs, the Smart Splitter allows the primary EV to charge first and then automatically switches to charging the secondary EV. OR You can charge both simultaneously at half speed by setting custom current limits.
Can I use the Smart Splitter if the outlet is far from where I park my EV?
Yes, If your 240V outlet is far from your EV parking spot, you have two options:
1) Use a 10 guage 240V high voltage extension cord (usually 10-25 feet) to reach your EV; or
2) Have an electrician install conduit from the outlet to your charging location. NeoCharge has partnered with Treehouse to provide effortless electrician installation in the case the outlet is too far.
What safety certifications and features does the Smart Splitter have?
The Smart Splitter is UL certified, ensuring it meets the highest safety standards in the industry.
It features a built-in software breaker that automatically shuts off power if the total power being drawn from both outlets exceeds the outlet's capacity, preventing overloading and short-circuiting.
If you have a 50 amp breaker the max amperage is 40 amps. If you have a 30 amp dryer circuit breaker then the max amperage is 24 amps.
This ensures the Smart Splitter adheres to National Electric Codes (NEC) by keeping the circuit power within 80% of the breaker amperage.
Where is the Smart Splitter built?
The Smart Splitter is diesigned and manufactured in the US.
We are a proud California based company with close ties to San Luis Obispo, CA. Learn About Us.
